⚡ SurfaceOps

✅ CERTIFIED REPORT

📋 EXAMPLE

🌿 EPA BMP

Environmental Compliance & BMP Audit

Example Certified Post-Action Report · Illinois IL EPA NPDES ILR40

Report #

CPAR-EX-008

Job Date

Friday, March 20, 2026

Surface Type

Powder-Coated Aluminum

Crew

Midwest Commercial Wash Inc.

Area

11,000 sqft

GPS

41.87890, -87.63550

Status

✅ Certified

4 Pillars of Compliance 📋 Chemical Log ✓ · 📸 Photos ✓ · 🧪 pH Log ✓ · ⏱ Surface + Method ✓ · 💧 Water Recovery ✓

📍

Job Details

Site address, surface type, crew & GPS coordinates

Property Address📍 233 S Wacker Dr, Chicago, IL 60606

Surface TypePowder-Coated Aluminum

Job DateFriday, March 20, 2026

Crew Name👷 Midwest Commercial Wash Inc.

Area Cleaned11,000 sqft

Dwell Time⏱ 4 minutes

Permit🌿 IL EPA NPDES ILR40

Permit AuthorityIllinois Environmental Protection Agency

GPS Coordinates📡 41.87890, -87.63550 ✓ Captured

Report GeneratedMarch 20, 2026

📍 GPS: 41.87890, -87.63550 · Open in map ↗

🧪

Chemical Application Log

Products used, dilution ratios & volume documentation — SH 0.5% · Bioclean (0.25 oz/gal)

Chemical Product	Volume Applied	Notes / Dilution
Sodium Hypochlorite 12.5% (diluted to 0.5%) ⚠️ See SDS below · OSHA HazCom 2012	28.00 gal	Ultra-low SH for powder-coat protection — prevents chalking and oxidation of coating
Bioclean Aluminum-Safe Detergent ⚠️ See SDS below · OSHA HazCom 2012	5.00 gal	0.25 oz/gal; pH-neutral formulation designed for anodized and coated aluminum panels

🌿

pH Neutralization Log

Pre- and post-application runoff pH readings — EPA 6.0–9.0 discharge standard

⬆ pH Before (Baseline)

7.6

✅ pH After (Neutralized)

7.1

✅ Final pH within EPA-acceptable range (6.0–9.0). Gatekeeper: PASS.

Time	Location	pH Reading	Note
05:00	Building perimeter drain	7.6	Baseline — neutral, Chicago city water influence
08:30	Building perimeter drain	7.3	Mid-wash
09:45	Building perimeter drain	7.1	Post-rinse — within IL EPA 6.0–9.0 standard

💧

Wastewater Recovery

Gallons captured for proper disposal · EPA NPDES compliance

💧 88 gallons recovered

Gallons Recovered💧 88 gal

Disposal Method🚛 Vacuumed and transported offsite per IL EPA NPDES ILR40 permit conditions

Compliance Note✅ Wastewater documented per NPDES requirements

📸

Job Site Photos

Before, during & after — visual compliance documentation

📷Before — Powder-Coated Aluminum

🔵During — Chemical application

✅After — Surface restored

📋 Photo placeholders shown. Real PARs include uploaded before/during/after photos stored in your account.

⚠️

Safety Data Sheets (SDS)

OSHA HazCom 2012 — product safety information for all chemicals used

🧪

Sodium Hypochlorite 12.5%

⚠️ HAZMAT · GHS05 (Corrosive) · GHS07 (Irritant)

⬇ Download SDS

PPE RequiredChemical-resistant gloves, safety glasses

Spill ResponseDilute with large amounts of water.

NotesApplied at 0.5% — powder-coat manufacturer warranty limit.

🫧

Bioclean Aluminum-Safe Detergent

⚠️ HAZMAT · Non-hazmat

⬇ Download SDS

PPE RequiredGloves recommended

Spill ResponseRinse with water.

NotespH-neutral. Safe for anodized and powder-coated aluminum curtain walls.

🏅

SurfaceOps Certification

Compliance attestation & verification record

Operator Compliance Statement: The undersigned operator certifies that all information contained in this Post-Action Report is accurate and complete. Chemical products were applied in accordance with SDS guidelines and applicable EPA/state stormwater Best Management Practices. Runoff was managed per the documented disposal method, and all pH readings were recorded at time of service.

Crew / Operator

Midwest Commercial Wash Inc.

Surface Type

Powder-Coated Aluminum

Job Date

Friday, March 20, 2026

Report Number

CPAR-EX-008

🌿 Illinois — IL EPA NPDES ILR40 — State Compliance Notice

Illinois EPA NPDES Industrial Stormwater Permit ILR40 requires BMPs for commercial building maintenance activities. SH was applied at 0.5% concentration to protect powder-coat finish per manufacturer warranty conditions. All cleaning runoff was captured in a portable containment berm system. pH readings confirm 7.1 discharge — within IL EPA 6.0–9.0 acceptable range. View Illinois compliance guide →

← View all 10 examples ⚡ Generate My PAR Preview (Free) →