Georgia Pressure Washing Stormwater Compliance Guide

GA EPD: Georgia Stormwater Enforcement at a Glance

Stormwater compliance in Georgia is administered by the Georgia Environmental Protection Division (GA EPD) under the NPDES General Industrial Stormwater Permit (GAR050000). Commercial pressure washing operators must comply with permit conditions before discharging any wash water — including to sanitary sewer connections, where applicable. Operating without compliance documentation exposes contractors and property owners to per-day civil penalties.

Recent Enforcement Activity

The 4 BMP Gaps That Get Georgia Pressure Washing Operators Cited

In Georgia, GA EPD specifically georgia epd runs one of the most active inspection programs in the southeast — 100 to 125 inspections per year in the atlanta metro alone. Across all MS4 enforcement programs, four documentation failures drive the majority of citations:

1. Missing or incomplete chemical log Every cleaning chemical used must be recorded: product name, SIC code, application rate, and disposal method. GA EPD inspectors request chemical logs on first contact — operators without one on-site face immediate citation.
2. No water reclaim manifest or disposal documentation Where did the wash water go? Containment alone isn't enough — operators must document disposal at an approved facility or a permitted sanitary sewer connection. In Georgia, undocumented wash water disposal is treated as an illegal discharge.
3. No pre/post job photos with GPS and timestamp Photographic evidence that containment was in place before and after each job is required documentation under GA EPD's BMP standards. Photos without location metadata do not satisfy the requirement.
4. Missing SDS documentation for all cleaning chemicals Safety Data Sheets must accompany every job record and be available on-site during operations. Georgia's GA EPD requires SDS on-site and as an attachment to the chemical log for each product used.

Georgia Stormwater Rules for Pressure Washing Operations

NPDES General Industrial Stormwater Permit (GAR050000) — Key Requirements

"Failure to comply with any permit requirement constitutes a violation. Civil penalties for violations may reach $32,500 per day per violation, accruing from the first day of noncompliance until the violation is corrected and documented." Georgia Water Quality Control Act O.C.G.A. §12-5-54 — GA EPD

Georgia EPD runs one of the most active inspection programs in the Southeast — 100 to 125 inspections per year in the Atlanta metro alone. Both a chemical log and a water reclaim manifest are required documentation for every pressure washing job in Atlanta metro MS4 areas. GA EPD inspectors specifically target mobile cleaning operators without on-site documentation. The $32,500/day penalty reflects Georgia's own enhanced enforcement authority under O.C.G.A. §12-5-54, separate from the federal baseline. Savannah and Columbus MS4 programs have introduced their own mobile operator registration requirements. Operators without a compliant SWPPP on file face immediate stop-work orders.

For pressure washing contractors, Georgia's permit framework creates specific documentation obligations on every job: chemical log entries before work begins, containment setup verified with pre-job photos, wash water collected and disposed of at an approved facility or licensed sanitary connection, and post-job photos with GPS metadata and timestamp confirming the site was left without surface runoff. Each of these elements is independently verifiable by an inspector — missing any single item is sufficient for a notice of violation.

In Georgia's largest markets — Atlanta, Savannah, and Columbus — local MS4 permits add requirements on top of the state GA EPD baseline. Commercial pressure washing operators in these metros should verify local ordinance compliance with their municipal stormwater authority before beginning commercial operations. Municipal MS4 programs may require advance registration, bond documentation, or site-specific BMP plan approval beyond what GA EPD requires.

What Does a $32,500/Day Fine Look Like on One Contract?

The calculator below shows your 30-day exposure based on contract value and operating frequency. Most contractors find the result is 10–100× what they earn from the contract.

Related Compliance Resources

• State enforcement table: All fine ceilings compared →
• BMP Compliance Playbook: Water recovery manifest, chemical log, pre/post photos →
• GL chain: Why your insurance may not cover a stormwater fine →
• ← All 50 States + DC: Stormwater Compliance Index